| Subject | Text |
| a most siple ... | a most simple temperature interface is germanium transistor B,K, to multimeter.... but is better to |
| Maybe it doesn't have a battery link.
Is this it? apcc.com/resource/include/techspec_index.cfm?bas |
|
|
| Those key combinations may work for the 1250 but they do not work on my 1250+. I've tried every key |
| Re: Replacing rca jacks on am/fm tuner | [quote:1d00b38538="Anonymous"]Hi
How hard is it to replace rca output jacks in a Yamaha tuner? Ge |
| I got as far as 9.2 and then couldn't work out where one of the tabs was so put it all back together |
| Sony MHC-GRX40AV | Greetings all,
I'm wondering if anyone can help. I have a Sony MHC-GRX40AV 3-CD stereo which has a |
| Just click on my email tab. |
| It sounds like a bad electrolytic capacitor in the vertical circuit. You would have to know about t |
| Ok, I am not here all the time but will check frequently;
The loose ground issue was mainly due to |
| Driver Issue | I have seen this on several computers and its usually a driver issue. A driver is a program that te |
| [quote:0f8415f5ac="vtech"]In general there are couple of things to keep in mind.
Going from NiCAD/ |
| Thanks very much Sparky. Sorry I couldn't rad and reply to your posting sooner, but my computer is p |
| In general heatsinks are usually at zero potentional, however depending on the circuit design, it ma |
| HP Laserjet 4P paper path assembly | Hi,
Some how the rear paper path assembly (with the wheel for rear or upper paper path) fell out |
| The "factory mode" on screen menu can be accessed by:
1. press EXIT
2. go to the 7th tab, down to |
| Couple of things to try
Disconnect the secondary monitor if you have one
Try entering the bios |
| Thanks again for more input, vtech.
We tend to think similarly when it comes to *phile products. |
|
|
| In general there are couple of things to keep in mind.
Going from NiCAD/NIMH to lithium is definit |
| Analogue radio repairs | Radios for hard to fix radios
GP300:
Fault…. Doesn't turn On (Dead radio)
1/Check Fuses
2/Resold |
| Philips #27PT6441/37 Will Not Turn On! - UPDATE!! | I finally took it in to a shop for repair and saw [b:2d120d15d9]FOUR[/b:2d120d15d9] sets JUST LIKE M |
| Find your realtek in Device manger; Right click, disable and re-enable it. If that does not do it, t |
| Thank god for this post, the reds and greens were too strong on my 2060u and this helped me fix it c |
| [quote:7667e4f9a7="jts1957"]Any of these will work. Most significant difference I see is whether tab |
| MATSUI VP9406 VCR | If the tapes you are using has the record inhibit tab missing these symptoms will arise if record is |
| philips 28pw6517 and logik lck17ln2 lcd | hi all, i have a philips 28pw6517, this set was tripping with 1 small puff of smoke, when doing some |
| Have you tried uninstalling the CD-RW Drive by right clicking My computer then properties. Then clic |
| Testing the circuit is to be done with the power off!!
Do not apply power until you are sure you ha |
| If you are using Microsoft Windows Operating System then Go To Control Panel then Go to Sound and A |
| Did you pull the tab? |
| To get to the other forum, go to the www.eletronic-circuits-diagrams.com home page and on the left h |